9
1 2 3
4 5 6
7
6 sec
clik clik
When your non-washable filter unit needs replacing
the appliance will display the pattern shown. To replace
the non-washable filter unit, follow these steps. Ensure
your appliance is unplugged. Your Dyson appliance is
programmed to remind you to replace the filter unit after
12 months based on 12 hours usage a day. Please note
your indicator will activate sooner with more use. The
indicator is only a guide and you may need to replace
the filter unit more regularly.
A clockwise-rotating loading pattern
will be shown on the LED display.
Once the loading pattern is complete, the
appliance will return to its normal usage.
When you have re-assembled your appliance, press and hold
the 'Standby ON/OFF' button for 6 seconds.
Replacing the filter unit
To Next Page
Loading...
Need help?
General
