Dyson Pure Cool User Manual

22
Changing the carbon filters
To remove the carbon filters:
pull the tabs on both sides of
the filters.
Dispose of the carbon filters in
the bin.
The shrouds will release with the
glass HEPA filters attached.
Unplug the appliance from
the mains electricity supply.
Slide the buttons down on
both sides of the shrouds.
Important: Always unplug the
appliance before changing filters.
The remaining filter life is shown in
the display and will indicate when
the non-washable carbon filter
needs replacing.
x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
1 2 3
clik
x2
clik
x2
x2
x2
clik
x2
clik
x2
x2
x2
06.07.2018 11:40 - C93644_TP04_OPMAN_ANZ_X438-OPMAN-93644.indd_15_4c0s

Dyson Pure Cool Specifications

General

Placement	Floor
Product color	Anthracite, Blue
Built-in display	No
Efficiency	99.95 %
Night mode	Yes
Noise level	- dB
Air purify rate	- m³/h
Number of speeds	-
Suitable for room area up to	- m²

Weight and Dimensions

Width	355 mm
Height	616 mm
Weight	3120 g