Dyson Radix Cyclone 8 DC07 brush control User Manual

Using your DCO7
Plug in at mains and press
on/off switch.
To start vacuuming, push
cleaner head down with foot
and pull handle towards you.
Ensure machine is in upright
position before using tools.
Press wand release catch 1 to
release ready-to-go hose and
slide wand to end of hose.
A Wand mode
Slide back wand cap and
place tools directly on to
wand handle.
Using the tools
NB You can twist the brush and
stair tool heads to make
cleaning easier.
Anti-jam brushbar
1 Manual brush off
for delicate rugs and floors.
2 Brush off
when upright.
3 Auto brush on
for normal cleaning.
1
2
3
A
1
Ensure hair and loose
clothing are kept clear of
wand cap/brushbar when
machine is switched on.
<297mm>

Dyson Radix Cyclone 8 DC07 brush control Specifications

General

Brand	Dyson
Model	Radix Cyclone 8 DC07 brush control
Category	Vacuum Cleaner
Language	English