EasyManua.ls Logo

Dyson supersonic HD01 - Operating Instructions; Polarized Plug Safety; ALCI Device and Testing

Dyson supersonic HD01
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
If it still does not fit, contact
a qualified electrician to install
the proper outlet. Do not attempt
to defeat this safety feature
and do not change the plug
in any way.
25. This machine is provided with
a protective device (ALCI-
Appliance Leakage Circuit
Interrupter) that may make
the machine inoperable
under some abnormal
conditions (such as immersion
of the machine). If the machine
becomes inoperable, return the
machine to a service center for
examination and repair.
26. The machine has a reset and
test button built into the plug,
which should be operated each
time the machine is plugged
in and used. To test: press the test
button. The reset button will pop
out, indicating that the machine
is safe to use. To reset: unplug
the machine and press the reset
button. Plug in again to use
your machine.
27. Note – If the ALCI trips while
in use, the machine should
be unplugged. Press the reset
button and reinsert the plug into
the outlet. If the ALCI immediately
trips for a second time, unplug
the machine and contact the
Dyson Helpline.
15.02.2019 12:05 - C98717-HD03-X605-US-OPMAN_15_4c0s

Other manuals for Dyson supersonic HD01

Related product manuals