EasyManua.ls Logo

Dyson Supersonic HD02 - Page 6

Dyson Supersonic HD02
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
7. This appliance has a non-self
resetting thermal cut out safety
device to prevent overheating.
If your appliance cuts out,
unplug it from the mains supply
socket and leave to cool.
8. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must not be
supplied through an external
switching device, such as a timer,
or connected to a circuit that
is regularly switched on and
off by the utility company, or
plugged into any socket where
the electrical supply is unstable
or likely to be turned off.
9. For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable.
Ask your installer for advice.
10. Do not use the appliance for any
other purpose than drying hair.
11. Do not handle any part of
the plug or appliance with
wet hands.
12. Do not unplug by pulling on
the cable. To unplug, grasp
the plug, not the cable.
The use of an extension cable is
not recommended.
14.11.2017 16:48 - C91854-HD02_OPMAN_FEAST_X332-PRO-OPMAN_15_4c0s

Other manuals for Dyson Supersonic HD02

Related product manuals