11
LEDs
Diagnostics
The LEDs will flash indefinitely to communicate
one of the following warnings:
Settings
When solid, the LED lights indicate
which settings you’re using.
Flow
High
Temperature
Low/scalp mode
Medium
Constant cold/
cold shot
No red
LED
Fast
Medium
Gentle
If all three red lights
remain illuminated
contact the Dyson
Helpline.
Clean the filter. See
the "Regular filter
maintenance" section
for details.
Maximum thermistor temperature
at safety shut down: 145°C.
Maximum operating temperature in
normal working conditions: 105°C.
DO NOT TURN
BACK ON
04.05.2018 07:56 - C93987_HD02_OPMAN_EU_X583-PRO-OPMAN-93987.indd_15_4c0s
To Next Page
Loading...
