Regular filter cleaning
Check your filter is clear of debris and hair product residue every month,
or when the LED lights alert you.
Unplug your machine from the mains electricity supply and allow it
to cool down before cleaning your filter.
The Dyson Supersonic Nural™ hair dryer has highly tuned technology
to give outstanding performance.
This technology needs to be kept free from debris and hair product
residue. Regular maintenance is required to maintain performance.
Hold the handle of your machine firmly and gently rotate the filter
cage anti-clockwise.
Pull down and away from the machine. Use a lint-free cloth or
soft brush to remove any dust or debris from both the filter cage
and the filter mesh.
Step 1
Step 2
Step 4
Rotate the filter cage back into position until correctly aligned.
Rotate clockwise to lock before use.
Maintaining performance
Step 3
Do not use water to clean the filter mesh and avoid applying
too much pressure.
Close-up of the
removable filter
cage at the
bottom of the hair
dryer. Arrows
indicate twisting
to the left and
pulling away.
Close-up of the
removable filter
cage at the bottom
of the hair dryer.
An arrow indicates
twisting to the
right to re-secure.
Close-up of the filter cage
removed from the filter.
A cloth gently cleans the
filter and the cage.
To Previous Page
Loading...
