Using your hair dryer
Diagnostics
Yellow flashing LED:
Your filter needs cleaning.
White flashing LED:
Your filter is either absent or not fitted properly. Ensure filter is fitted
correctly for your hair dryer to work.
Temperature
Airflow
All three white LEDs flashing:
Press the on/off button to clear an error.
All three red LEDs flashing:
Switch off your machine, switch off the mains plug and unplug your plug
from the socket. Then, insert the plug back in the socket, switch the mains
plug on and turn your machine back on.
All of the white and red LEDs flashing together:
Contact Dyson at 1-
877-397-6622.
To learn how to clean your filter, follow the instructions
or watch the video at DysonCanada.ca.
High
Medium
Low
Cool
Fast
Medium
Gentle
Settings
Intelligent attachments are preset with optimal airflow and temperature
ranging, and recognise your last-used setting with Attachment learning.
LEDs
LED colours indicate the four possible heat settings and three airflow settings.
White-blue LEDs flashing:
There is no attachment fitted. Your machine will not work without
an attachment.
Showing three circles for
high airflow, two circles
for medium airflow and
one circle for low airflow.
Shows three red circles
for high temperature, two
red circles for medium
temperature and one red
circle for low temperature.
Shows different LED variants
for different messaging from
the machine for maintenance.
DEPENDENT ON MARKET – DELETE AS NECESSARY
To Next Page
Loading...
