Step 8
Using a pinching motion, gently squeeze dry the inner filter
cage with a dry paper towel.
Step 9
Allow both filters to fully dry before proceeding.
Step 10
Slide the inner filter back into the cage, then open at the split line and replace
back on to the machine to click into place.
White LED flashing:
Your filter is either absent or not fitted properly. Ensure filter is fitted correctly
for your hair dryer to work.
To watch how to clean and maintain your machine, visit D
ysonCanada.ca.
clik
Hand shown to be
wiping the internal
filter and dabbing
away dampness.
External and
internal filter.
External filter shown to be
reconnecting to the machine
with a magnetic click
demonstrated by arrows.
White light is
flashing on the
machine.
To Previous Page
Loading...
