9
1 2 3
4 5 6
7
6 sec
clik clik
When your non-washable filter unit needs
replacing the machine will display the
pattern shown. To replace the non-washable
filter unit, follow these steps. Ensure that your
machine is unplugged. Your Dyson machine
is programmed to remind you to replace the
filter unit after 12 months based on 12 hours
usage a day. Please note that your indicator will
activate sooner with more use. The indicator
is only a guide. Use in heavily polluted
environments may require the filter unit to be
replaced more regularly. Outside air quality
can be checked through the Dyson Link app.
A clockwise-rotating loading pattern
will be shown on the LED display.
Once the loading pattern is complete, the
machine will return to its normal usage.
When you have reassembled your machine, press and
hold the ‘Standby ON/OFF’ button for 6 seconds on
the remote control to reset the filter indicator.
Replacing the filter unit
When disposing of the exhausted filter
unit please do so in accordance with
local regulations.
To Next Page
Loading...
Need help?
General
