Charging your headphones
Battery is more than 20% charged
The LED will turn green.
Battery is less than 20% charged
The LED will turn a solid amber for five seconds.
Charging
When connected to a power supply and charging,
the LED will pulse amber. When fully charged,
the LED will turn green and then fade to off.
Insufficient charge for purification
The LED will flash amber for five seconds.
Your headphones will need to have more than 20% charge
to run purification.
You can check charge level by pressing the airflow button.
Action and LED behaviour
Battery life
The battery life of your headphones with air purification will
improve with use. Allow at least 5 hours of initial use to achieve
the best runtime performance.
To Next Page
Loading...