DYTECH GT06 - Page 12

Command
Description
1)Default 10 Seconds;
2)30 mean 30seconds.
Command
Feedback
Successful Setting: fix 30S ok!
5)Static Upload Time Setting
SMS
Command
Parameter
Sample
Static
Upload
Time
Setting
sup123456 5
sup123456 5
Command
Description
1)The default: GPS closed, only upload
heartbeat packet to save power;
2)If needed to send this command to
upload GPS data in static;
3)5 mean 5minutes send one time GPS
data in static;
4)SMS command: nosup123456 to
cancel this setting.
Command
Feedback
Successful Setting: 1)sup ok!
2)nosup ok!
6)Sleeping Setting
SMS
Command
Parameter
Sample
Sleeping
Setting
sleepin123456
sleepin123456
Command
Description
1)After sending this command, the
tracker will come in sleeping mode
after 5minutes in static;
2)When Car start, the tracker auto
come in real time tracking.
Command
Feedback
Successful Setting: sleepin ok
7)Inflection Points Supplementary Setting