11 GB
Operation: CD-Player, Cleaning and Disposal, Information
Programming a track sequence [ »TRACK MEMORY« ]
Programming a track sequence can only be done when the CD has stopped. You can program
up to 16 tracks.
1. Place a CD into the compartment as described in “Inserting a CD”.
2. Press the Memory button
}. The Display R shows MEMORY TRACK PR:01.
3. Use buttons
U or I to select the number of the track that you wish to occupy programmed position PR:01.
4. Press the Memory button
} again. This track is now stored in this programmed position (PR:01).
The Display changes to the next programmed position (PR:02).
Repeat steps 3) - 4) for up to 20 tracks. You can also program a track several times.
The programmed track sequence is stored until you remove the CD from the CD compartment, choose
another function or switch off the equipment.
Start programmed track sequence
· Press the PLAY/PAUSE button u - to start playing in the programmed track sequence.
· Press the STOP button
y to switch of a programmed track sequence.
Repeat functions [ »REPEAT« ]
· To repeat all the tracks on a CD, press the Preset/Repbutton t. The display R shows REPEAT.
· To repeat a single track on a CD, press thePreset/Rep button
t twice when the desired track is running.
The display
R flashes REPEAT.
· To repeat a programmed track sequence on a CD, press the Preset/Rep button
t when the programmed
track sequence is running. The display
R shows REPEAT.
· To switch off the repeat functions, press the Preset/Rep button = repeatedly until the display
R no longer
shows REPEAT.
Play tracks in random sequence [ »RANDOM« ]
The Random function selects a random choice of tracks on the inserted CD.
· To activate this function press the Random button
F. The Display R shows RANDOM.
· To start playing tracks in a random order press button
u.
· To cancel the Random function press the Random button
F until the Display R no longer shows
RANDOM.
Care and cleaning
1. Remove the mains plug from the socket before carrying out any tasks on the tool!
2. Do not allow any liquids to enter the saw. Use a soft cloth to clean the housing. Never use petrol, solvents or
cleaning agents that might attack plastic.
Disposal
The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local
recycling centre.
Please contact your local council office to find out about disposal facilities for your worn-out appliances.
Batteries must not be disposed of as household refuse. Battery users are obliged by law to take all
unwanted rechargeable and non-rechargeable batteries to a collection point operated by a public authority
or a retailer.
This law is intended to ensure that batteries are disposed of in an environmentally-friendly manner.
The batteries must be handed in only in the discharged state.
Statement of conformity
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this
product conforms with the following EC regulations:
EU Low Voltage Directive: 72 / 23 / EEC
Electromagnetic compatibility: 89/336 EEC
Applicable harmonised standards: EN 55013, EN 55020, EN 61000-3-2,
EN 61000-3-3, EN 60065
Model type: KH 2340 / 2341
Description: Designer Audio Unit with CD player
Bochum, 31.01.2004
Hans Kompernaß
- Managing Director -
To Next Page
Loading...