10
THE LCD DISPLAY DESCRIPTION
M88c
Blinking "1D" indicates the stimulation is
ready for adjustment.
Solid "I D" indicates stimulation is "Locked"
Displays the Stimu ation Level
"O" means no stimulation and "HI" means
the highest stimulation level(100)
Momentary / Continuous Button "M/C"-The M/C Button on the backside
of the transmitter allows the user to easi y switch between the three
stimulation modes. The function of stimulation buttons changes by mode
-> Combo Mode --> Momentary Mode --> Continuous Mode
To Change the mode: Press and hold the M/C button for 2 seconds to
enter change mode indicated by a beep Then Press and release the
M/C button to change from M(Momentary) to C(Continuous) to M+C
(Combo-Momentary/Continuous) stopping on the desired mode
Stimulation
Button
Display
S (Black)
S (Red)
300/302 Owner's Manual
Combo Mode
M88c
Momentary
Continuous
Momentary
Booster
Continuous
Booster
Momentary
Mode
M88
Momentary
Momentary
Booster
N/A
Continuous
Mode
88c
Continuous
Continuous
Booster
N/A
N/A
Tapping Sensation or Tone Stimulation
To Next Page
Loading...
