E-Collar Technologies 400 Series

Need help?

Do you have a question about the E-Collar Technologies 400 Series and is the answer not in the manual?

Summary

Important Safety Notice

Device Operation Guide

Battery Charging Instructions

Turning E-Collar On and Off

Correct Collar Fitting

Button Functions and Modes

Stimulation Types: Momentary, Continuous, Tapping Sensation

Explains momentary, continuous stimulation, and tapping sensation features.

Stimulation Buttons S (Black & Red)

Controls momentary, continuous, and boosted stimulation for the collar receiver.

Boosting Stimulation Modes

Finding Proper Stimulation Level

Locking;Unlocking Stimulation Level

Setting the Boost Level

Collar Pairing and Configuration

Pairing;Syncing a Transmitter to a Collar Receiver

Procedure to pair or sync a transmitter to a collar receiver.

Changing to a 2-Dog Transmitter System

Adding;Replacing a Collar for a Second Dog

402 Model Button Functions

Boosting Stimulation for Dog 1 and Dog 2

Methods for applying boosted stimulation to specific dogs.

Momentary and Continuous Stimulation Types

402 Lock;Unlock Stimulation Level

402 Boost Level Setup

Setting Boost Level for Dog 1 (Black Collar)

Procedure to set the boost level for Dog 1 using Momentary Mode.

Testing the E-Collar Unit

Replacing Contact Points

Troubleshooting Common Issues

Receiver;Transmitter Not Turning On

Ensure the collar receiver is fully charged; its light should turn green when connected to the charger.

Receiver Not Responding

No Stimulation Provided to Dog

Cannot Change Stimulation Level

Safety and General Information