13
HOW TO FIND THE PROPER
STIMULATION LEVEL
Rotating clockwise increases the
stimulation level, and rotating
counter-clockwise lowers the
stimulation level.
It is highly recommended that the user practices changing levels and
modes before putting the collar receiver on a dog.
Setting the correct stimulation level for your dog is very important. To
set your “conditioning” stimulation level, correctly put the collar
receiver on your dog (see page 9 for instructions). Let him/her get
used to the collar receiver for a couple of hours.
While watching your dog, turn the level to “0” and press the
continuous stimulation button. Slowly turn the stimulation up at a rate of
approximately 2-3 levels per second. When your dog first perceives the
stimulation, usually between 5 and 20, release the button. This is your
“conditioning” stimulation level. You may need to increase the
“conditioning” level a few levels to get your dog to respond at first,
some dogs are more stubborn and need more stimulation. The boosted
level is typically 5 to 20 levels higher than the “conditioning” level.
400/402 Owner’s Manual
To Next Page
Loading...
Need help?
General
