THE LCD DISPLAY DESCRIPTION
400/402 Owner’s Manual
10
Flashing “1D” indicates the stimulation is
ready for adjustment.
Solid “1D” indicates stimulation is “Locked”
Displays the Stimulation Level :
“0” means no stimulation and “HI” means
the highest stimulation level(100 )
Momentary / Continuous Button "M/C"- M/C Button on the backside of
the transmitter allows the user to easily switch between the three
stimulation modes. Function of stimulation button changes by mode.
Stimulation
Button
Momentary
Mode
Continuous
Mode
Combo Mode
Tapping Sensation or Tone/Stimulation
To Next Page
Loading...
Need help?
General
