BUTTON FUNCTIONS
400/402 Owner’s Manual
11
Stimulation Button S (Black)
- Sends momentary or continuous stimulation to the collar receiver
based on the state of Momentary/Continuous Mode.
Stimulation Button S (Red)
- Sends momentary or continuous boosted stimulation.
- If stimulation level is 10, boosted stimulation sends [10 + boost level ]
- The default value of the boosted level is 5, it can be adjusted to any
value between 1 and 60. Smaller and more sensitive breeds should
use levels 1 through 20, larger more stubborn breeds may need
more of a boost, maximum boost is 60.
Momentary Stimulation
Sends a single pulse of stimulation at the set level when you press
the stimulation button.
Continuous Stimulation
Sends pulses of stimulation for as long as the button is pressed,
timing out after 10 seconds (this is a safety feature designed to
prevent accidental over-stimulation of your dog). The stimulation can
be increased or decreased while the button is being pressed.
Tapping Sensation
Vibration specifically designed to distract your dog, great for deaf
dogs and stimulation sensitive dogs.
Tone/Stimulation (Pavlovian Stimulation)
After 1.2 seconds of tone, the collar will send continuous stimulation
for as long as the button is pressed. Release before 1.2 seconds for
tone only.
To Next Page
Loading...
Need help?
General
