11
BUTTON FUNCTIONS
Momentary Stimulation
Sends a single pulse of stimulation at the set level when you press
stimulation button
Continuous Stimulation
Sends pulses of stimulation for as ong as the button is pressed,
timing out after 10 seconds (this is a safety feature designed to
prevent accidental over-stimulation of your dog) The stimulation can
be increased or decreased while the button is being pressed
Tapping Sensation
Vibration specifically designed to distract your dog, great for deaf
dogs and stimulation sensitive dogs
Tone follwed by Stimulation(PavlovianConditioning)
After 1 2 seconds of tone, the collar will administer continuous
stimulation for as ong as the button is pressed (up to 10 seconds)
Release before 1 2 seconds for tone only
Stimulation Button S (Black)
Sends momentary or continuous stimulation to the col ar receiver
based on the state of Momentary/Continuous Mode
Stimulation Button S (Red)
- Sends momentary or continuous boosted stimulation
- f stimulation level is 10, boosted stimulation sends CIO+ boost evel ]
The default value of the boosted level is 5, it can be adjusted to any
value between 1 and 60. Smal er and more sensitive breeds should
use levels 1 through 20, arger and/or more stubborn breeds may
need a higher boost
300/302 Owner's Manual
To Next Page
Loading...
