300/302 Owner’s Manual
20
302 BUTTON FUCTIONS
Boosting Stimulation
To boost Dog 1, press the “S" (Black) button followed by the “S" (Red)
button boosted stimulation will be applied until you release both
buttons.
To boost Dog 2, press the “S" (Red) button followed by the “S" (Black)
Momentary Stimulation
Sends a single pulse of stimulation at the set level when you press
the stimulation button.
Continuous Stimulation
Sends continuous pulses as long as the stimulation button is pressed,
timing out after 10 seconds (this is a safety feature designed to
prevent accidental over-stimulation of your dog). You may change the
stimulation level while the button is depressed if it is not locked.
Tapping Sensation
Vibration specifically designed to distract your dog.
Tone followed by Stimulation (Pavlovian Conditioning)
After 1.2 seconds of tone, the collar will administer continuous
stimulation for as long as the button is pressed (up to 10 seconds).
Release before 1.2 seconds for tone only.
To Next Page
Loading...
