EasyManua.ls Logo

E/D/E HLT1-520 - Specifications; Safety Instructions

E/D/E HLT1-520
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bedienungsanleitung · Operating Instructions · Mode d’emploi
Istruzioni per l‘uso · Gebruiksaanwijzing · Instrukcja obsługi
Manual de instrucciones
E/D/E GMBH · EDE PLATZ 1 · 42389 WUPPERTAL · GERMANY PAGE | 11
Specifications
Model
HLT1-
520
Rated Capacity 1000 kgs
Max. Lifting Height 800 mm
Min. Fork Height
85 ±2 mm
Fork Length 1140 mm
Fork Overall Width 520mm
N.W. 106 kgs
NOTE:
Two speeds (fast and slow) can be automatically changed as the load
of more than 150kgs.
Safety Instructions
1. The truck shall be used in accordance with the instructions manual.
2. Don’t put the hand & foot under the fork at any time.
3. Don’t work on the slope surface.
4. Quick lifting is prohibited for loads of more than 150 kgs. Any
manipulation of the pressure relief valve is strictly prohibited. All
assembling, adjusting and maintenance shall only be done by
industrial mechanics trained people. These people must be familiar
with all safety regulations of European and national where the item
is in use relating to the operation and maintenance of pedestrian
controlled industrial trucks.
5. Load should be put on the fork center. Side-load is strictly
prohibited.