E-max 100LD - Speedometer Malfunction Messages

30
3.4 Malfunction messages in the speedometer display
Display Text
To overcome this problem:
Battery empty
Re-charge!
Please charge
Scooter disabled
side stand out
Fold side stand in and check the kill switch
broken or not
Error
Voltage too high
Don’t use scooter until voltage down to normal
Stop software
Input software again
Error system
Press MODE over 30s then start scooter again.
With all other messages that appear, turn the key switch to "Off" and then turn it back to
"Drive".
If fault message remains, please contact dealer.