8. 500 km Maintenance
This inspection must be performed in a time period that is 100 km either before or 100
km after, and no later than 1 year from the date of delivery.
• charge batteries (note battery guidelines) and check contacts
• check tyre pressure and correct if necessary
• check all main screws as torque requirements
• check screws, nuts and fastening points
• check motor mountings, stand mountings, suspension struts, fork and handlebar bearing
• check the functioning of front and rear suspension
• check that all operating parts are in working
order
• check all lights
• check directional stability, front & rear brakes
and handlebar
To Next Page
