FX AMOUNT
This function allows you to adjust the
ratio of wet (processed) to dry (unproc-
essed) signal coming out of each effect
processor. A setting of 100% would
indicate that all of the signal is being
processed by the effect. The B->A param-
eter allows you to adjust the amount of
effect B that will be fed through the A
effect. If B->A is set above 100%, the word
“Only” is displayed and the B amount
changes to “Off”. This disconnects effect
B from the outputs and routes ALL of
effect B through effect A.
FX AMOUNT A:50%
B->A:0% B:75%
MASTER TUNE
Master Tune adjusts the overall tuning of
all presets so that Proteus FX can be
tuned to other instruments. The master
tuning range is ± 1 semitone in 1/64th
semitone increments. A master tune
setting of “00” would indicate that
Proteus FX is perfectly tuned to concert
pitch (A=440 Hz).
MASTER TUNE
+63
TRANSPOSE
This function transposes the key of
Proteus FX in half-step intervals. The
transpose range is ± 12 semitones or one
octave.
TRANSPOSE
+12 semitones
GLOBAL BEND
This function sets the range of the pitch
wheel only when it is routed to control
pitch. The maximum pitch bend range is
± 12 semitones. This function only affects
presets which have their individual pitch
bend range set to global.
GLOBAL BEND
± 12 semitones
TO USE THE B->A ONLY
ROUTING FEATURE, THE
FX MIX SELECT MUST BE
SET TO “B”.
To Next Page
Loading...
