As an example, imagine you are using a
master keyboard which has pitch and
modulation wheels, a breath controller, a
data slider and a foot pedal, all of which
transmit their values over MIDI. The
standard MIDI controller numbers for the
controls are listed below (the pitch wheel
has a dedicated controller, PWH). First,
we would go to the Master menu, MIDI
Controller Assign and define the 4 MIDI
controllers that we wish to use. Assign
each controller number to one of the
letters A-B-C-D.
01 - Modulation Wheel A
02 - Breath Controller B
04 - Foot Pedal C
06 - Data EntryD
To complete the connections for a par-
ticular preset, go to the Edit menu,
Realtime Control, and route the MIDI A,
B, C, D to the desired destinations. These
could be patched to any 4 destinations or
even to the same destination. The MIDI
Controller Amount menu, (in the Edit
menu) allows you to scale the amounts of
each of the controllers by a positive or
negative value. The signal flow is shown
in the diagram below.
The MIDI controllers A-B-C-D must have both a source (0-31), and a control destination assigned.
STANDARD MIDI
CONTROLLER NUMBERS:
1- MODULATION WHEEL
2- BREATH CONTROLLER
3- PRESSURE REV 1 DX7
4- FOOT PEDAL
5- PORTAMENTO TIME
6- DATA ENTRY
7- VOLUME
8- BALANCE
9- UNDEFINED
10- PAN
To Next Page
Loading...
