Delayed LFO - The LFO wave begins after the specified delay time has elapsed.
AUXILIARY ENVELOPE
This is a supplementary, utility envelope
that can be routed to any realtime control
destination. The auxiliary envelope
parameters are: Envelope Amount, Delay,
Attack Time, Hold Time, Decay Time,
Sustain Level, and Release Time. The
delay time is variable from 0 to 13 sec-
onds (000-127). The envelope amount is
variable from -128 to +127. Negative
values will produce inverted envelopes.
The six stages of the Auxiliary Envelope Generator.
AUX ENV AMT DLY
+127 000
A: A H D S R
00 00 00 99 20
FOR MORE INFORMATION
ON THE ENVELOPES, SEE
THE PRESET PROGRAMMING
CHAPTER OF THIS MANUAL.
To Next Page
Loading...
