E-Tech IP 400 - Lone Work Mode; Transmit Power Adjustment; Transmit Tone (CTCSS;DCS) Selection

FILE: IP 400 Service manual.doc 2004.05.07
E-TECH Co., Ltd 8/18
5. Lone work
1).
to enter Menu Mode.
2) or to until
3)
to select
4)
or to select ON/OFF
6. Tx power
.
1).
to enter Menu Mode.
2)
or to until
3)
to select
4)
or to select HIGH / LOW POWER
5)
to select
7. Tx Tone
Selecting Transmitting TONE(CTCSS/DCS).
1).
to enter Menu Mode.
2)
or to until
3)
to select
4)
or to Select TONE을 either CTCSS or DCS.
0= NON TONE
1-38 CTCSS
101 – 183 DCS TONE
5)
to select exit