E-Tech IP 400 - Receive Tone (CTCSS;DCS) Configuration; Group Tone Settings; Beep Sound Control

FILE: IP 400 Service manual.doc 2004.05.07
E-TECH Co., Ltd 9/18
8. Rx Tone
Changing Receiving TONE(CTCSS/DCS).
1).
to enter Menu Mode.
2) or to until
3)
to select
4)
or to select TONE either CTCSS or DCS.
0= NON TONE
1-38 CTCSS
101 – 183 DCS TONE.
5)
to select exit
9. Group
Changing GROUP Tone.
1).
to enter Menu Mode.
2) or to until
3)
to select
4)
or to select scroll list
5)
to select exit
10. Beep on/off
1). to enter Menu Mode.
2)
or to until
3)
to select
4)
or to select on off .
5)
to select