E-TON Beamer - Specifications

Page 16
Beamer Scooter Specifications
Beamer (Model - PN2)
Engine
Type Two cycle air cooled oil injected
Displacement 49.3cc
Bore / Stroke
40.0 * 39.2mm
Compression 6.8 : 1
Power 5.2hp @ 7000rpm
Transmission
Type Automatic (C.V.T. V-Belt)
Chassis
Overall Length 1830mm / 72.0"
Overall Width 650mm / 25.6"
Overall High 1100mm / 43.3"
Wheel Base 770mm / 30.3"
Dry Weight 82kg / 180.7lb
Suspension
Front Telescopic Fork
Rear Unit Swing Arm / Single Shock
Brakes
Front Hydraulic Disc
Rear Mechanical Drum
Tires
Front 120/90-10
Rear 130/90-10
Tire Pressure
Front 18psi / 1.25kg/cm2 (Cold)
Rear 25psi / 1.75kg/cm2 (Cold)
Carburetor
Make/Size
Mikuni 18mm (Electrical Choke)
Main Jet
85mm
Pilot Jet
20mm
Air Mixture Adjustment
Back out ¾ - 1¼ turns
Idle 1700 - 1900rpm
Battery
12V-4AH/5AH - GTX5L-BS
Fluids
Fuel
Type Unleaded Gasoline 89 octane
Volume 5.5liters / 1.5gal
2 Cycle Oil
Type High grade synthetic 2 cycle injector oil
Volume 1.1 liters / 1.2qts
Transmission
Type SAE 80/90 weight
Volume 100cc / 3.4oz
Copyright ©2008-2009 ETON America, all rights reserved.