Fig. 4 Fig. 5
Fig. 6
Charging
Your scooter comes charged out of the carton. We still recommend charging the unit for
6-8 hours prior to it’s first use. We also recommend charging your scooter after each use
and prior to storage.
WARNING: Do not allow your scooter to go into deep discharge, as this will damage the
batteries.
Fig. 7
Fig. 8
1. Make sure unit is turned off.
2.
Open the charging socket cover
located on the left side of the
scooter frame, under the footplate.
(Fig. 7)
3. Locate your Battery Charger. (Fig.
6) Find the charger socket end
that has a single-prong socket and
plug it into the scooter.
4. Next, plug the AC plug into a wall
outlet.
When first plugged in, the charger will have
one red light that will illuminate, indicating
that the charging process has started.
Once the green light on the charger is
illuminated, you may remove the charger
and close the safety cap.
To Next Page
Loading...
