EasyManuals Logo

E-Z-GO 2Five User Manual

E-Z-GO 2Five
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
2Five Owner’s Guide 81
MAINTENANCE PROCEDURES
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
LIGHT BULB REPLACEMENT
To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean,
dry tissue or paper towel to handle the glass portion of the bulb.
Headlight Bulb Replacement
Make sure that the vehicle key switch is in the OFF position and
the key has been removed. For vehicles equipped with lights
mounted in the cowl, locate the headlight bulb socket on the
backside of the light assembly.
1. Disconnect the accessory harness (5) from the light bulb.
2. Turn the headlight bulb (3) clockwise and pull to remove.
3. Align the bulb with the opening in the back of the headlight
assembly.
4. Turn the bulb (3) counterclockwise until it stops.
5. Connect the accessory harness (5) to the light bulb (3).
.
3
5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the E-Z-GO 2Five and is the answer not in the manual?

E-Z-GO 2Five Specifications

General IconGeneral
BrandE-Z-GO
Model2Five
CategoryElectric Vehicles
LanguageEnglish

Related product manuals