Mode/Menu control
Mode: a.Regular mode:
Default mode after booting . Short press "mode"
button vertically to switch HDMI 2D13D or AV 2013D.
b.Racing
mode:
Long press "mode" button vertically until first beep
to switch mode from 4 pilots/6 pilots/8 pilots. For example: 4 pilots
/6 pilots18 pilots/exit racing mode switching circularly.
c.Auto search:
Long press "mode" button vertically until second beep
to enter auto search,
Menu:
Long press "mode button toward the left until it beep, entering menu
page. Short press "mode
.
button vertically to switch PICTURE page
to TOOLS page.
En PICTURE page, there are BRIGHTNESS/ CONTRAST/SATURATION
/VOLUME
;
In TOOLS page. there
are
ZOOM (16:9(Default)/4:3) and S-ROLOC
(AUTO/PAL/ NTSCi SECAM), press "mode' button forward or backward
to selecting when selected option turns into red, press mode button
towards the left or right to change settings.
NOTE:
Under menu page, it will auto-exit if no operation done
within 7-10s.
Channel/Band select
Channel:
Short Press channel up/down buttons will cause the channel to
incrementally increase/decrease from channels 'I to 8 (refer to
frequency table)
Band:
Long press channel up/clown buttons will cause the band to incrementally
increase/decrease from band A to H (refer to frequency table).
Turn onfoff OSD:
Press channel up and channel down button simultaneously to
turn on/off OSD
DVR
Built
-
in
DVR H.264 Encoded Video.
Video Format Auto toggles between NTSC or PAL.
DVR Recording file resolution NTSC at 720'480 or PAL at 720'576.
3
To Next Page
Loading...
