Upgrade Firmware
Goggles
1,Connect goggles to the computer.
2,Hold the left button when turn on the goggles, release the left button, computer will automatically install
the driver , computer will show a new removable storage .
3, copy the Firmware File to the folder(Not the SD card). goggles will installing the update at the same time.
Even enabled the rotar y switch function, the boot button is still left button. It will takes about 60s to
install the Firmware.
DVR
1,Take a TF card and format the card to FAT32.
2,Copy the DVR Firmware to the SD card , insert it in the goggles and turn it on.
3,Go to the system menu and choose DVR FM upgrade.
Receiver Firmware
1, Take the receiver out, hold the boot button when connect the receiver to the computer.
2,Computer will automatically install the driver , computer will show a new removable storage .
3, Copy the Firmware File to the folder(Not the SD card). goggles will installing the update at the same
time. it will takes about 60s to install the Firmware.
This content is subject to change, download latest version from:
7
www.eachine.com
Firmware Update
To Previous Page
Loading...
