you don’t need to reverse, please select “ OFF”, press “ENTER” to save and exit, press “ESC”
to exit directly.
六、r.tilt. [tilt reverse in vertical]
This function allows you to reverse in vertical.
Press “ ENTER” to enter, use “UP” or “DOWN”, if you need to reverse, please select “ON”; if you
don’t need to reverse, please select “ OFF”, press “ENTER” to save and exit, press “ESC” to exit
directly.
七、rset [device replacement]
This function allows you to restart up device to come back to original standard setting. Press
“ENTER” to confirm.
To Previous Page
Loading...
