4. Operation
4.3 Feeding the Adhesive Tape
4.4 Adjusting Tape Length
- 8 -
Move the guiding tape wheel from hole #1 to hole #6 to shorten the tape length.
4.5 Top Box Squeezer Adjustment
Adjustment Knob
• Loosen the knobs and move each top box
squeezer in the direction of the arrows 1
and 2.
• Rollers should touch (aka kiss) the edge
of the carton with a little bit of pressure.
• This will help squeeze the gap in between
the flaps.
• Top squeezers are mainly used for the
over filled cartons.
• Remember to adjust top squeezers when
changing carton sizes.
To Next Page
Loading...