E&R Classic KPN5000 - Adjusting Stretch Stitch Balance

10
ToPutontheDarningPlate:
1.Positionthedarningplatewith
the3pinsonthebottom.
2.Fitthedarningplatepinsintothe
needleplateholes.Thefeeddogs
willshowthroughthedarning
plateholes.
Aslongasyoukeepthereversestitch
controldepressed,themachinesews
backwards.
Thenumbersontheneedleplateindi-
catethedistancebetweenthecenter
needlepositionandtheline.
UseLeftNeedlePositionformore.
controlwhiletopstitchingoredge
stitchingdifficultfabrics.
NOTE:Useonlyzigzagpresserfoot
forLeftNeedleSewing.
Thenumbersinthefrontindicatein
millimeters.
Thenumbersinthebackindicatein
inches.
ReverseStitchControl SeamGuideLine DarningPlate LeftNeedlePosition
AdjustingStretchStitchBalance
ToselectStretchStitches,setthiscontrolatSS
position.
Instretchstitchsewing,StitchLengthControlshould
beintheCenterpositionbetween-and+(SSposition)
stitches.
Toshortenstretchstitches,turnthecontrolslightly
toward"-"Tolengthen,turntoward"+"
formostmaterials.Dependinguponthetypeoffabric
used.youmayneedtoadjustthiscontroltomatch
forwardstitchesofstretchsewingwithreversemotion
Settingmark
StitchLengthControl
StitchLength
SS
Stitchselector
Smockingstretch
Rickrackstretch
PDF created with pdfFactory trial version www.pdffactory.com