©2010 Ardisam, Inc.
REVISIONS
ECN #
REV.
DESCRIPTION
DATE
BY
8480
1
ISSUED DRAWING
10/4/2010
MDO
PARTS TO BE FREE OF
BURRS AND SHARP EDGES
THIS DRAWING AND ALL INFORMATION CONTAINED HEREIN IS AND REMAINS THE PROPERTY OF ARDISAM INC.
AND IS CONFIDENTIAL. IT IS SUBMITTED AND MAY BE USED ONLY IN CONNECTION WITH ARDISAMS' PROPOSALS
AND/OR ITS CUSTOMERS' ORDERS. IT SHALL NOT BE DISCLOSED TO OTHERS OR COPIED
WITHOUT ARDISAMS'
SPECIFIC WRITTEN CONSENT AND SHALL BE IMMEDIATELY RETURNED UPON REQUEST.
MATERIAL
TOLERANCE UNLESS
OTHERWISE NOTED:
0.0 ±.100 INCH ± 2.54 MM
0.00 ±.030 INCH ± 0.76 MM
0.000 ±.010 INCH ± 0.25 MM
ANGLES:
0 ± 2°
0.0 ± 1.0°
THREADS CLASS 2
PRIMARY DIMENSIONS ARE IN INCHES
SECONDARY DIMEMSION ARE IN MM
ALL ANGLES ARE DECIMAL DEGREES
UNLESS OTHERWISE SPECIFIED
NAME
TREATMENT
DR BY APPD PRT NO
W1200
PT WEIGHT
SURFACE AREA
DATE
REVISION
THIRD ANGLE PROJECTION
SEE BILL OF MATERIALS
NONE
32023.47
3424787.55
W1200 5 TON ELECTRIC
LOG SPLITTER
1
MATT OLSEN
MDO 9/17/2010
09/17/2010
SHEET: 1 OF 8
To Next Page
Need help?
General
