Need help?Do you have a question about the EarthQuaker Devices Avalanche Run and is the answer not in the manual?
Adjusts delay time, regeneration, tone, and volume.
Adjusts reverb decay length and volume.
Selects effect mode and delay subdivision ratios.
Maps expression pedal to specific controls.
Standard forward delay and stereo reverb mode.
Reverse delay with normal reverb, or toggle between modes.
Adds an auto-swell effect triggered by picking dynamics.
Steps to enable buffered bypass trails with selectable lengths.
Steps to re-enable true bypass mode.
Instructions for mono, stereo, and mixed mono-in/stereo-out configurations.
Location, type, and recommendations for the expression jack.
Simultaneous momentary and latching footswitch operation.
Current draw and recommended power supply details.
Key technical specs including converters, impedance, and bypass modes.
Details on the limited lifetime warranty and contact information.
General| Modes | Normal, Reverse, Swell |
|---|---|
| Type | Stereo Delay and Reverb |
| Delay Time Range | 0ms to 2000ms |
| Reverb Type | Plate Reverb |
| Expression/CV Input | Yes, assignable to Time, Repeats, or Mix |
| Tap Tempo | Yes, via Tap/Hold footswitch |
| Input Impedance | 1M ohm |
| Power Requirements | 9V DC, center negative |
| Inputs | Mono Input |
| Outputs | Stereo Outputs |
| Features | Stereo operation, tap tempo, assignable expression control, switchable bypass modes |
| Controls | Time, Repeats, Mix, Tap/Hold footswitch, Bypass footswitch |
To Next Page