Avoid collisions with hard objects which could damage your machine.
Keep bystanders and animals at least 5 m away from the working area.
Make sure that the switch is in position “0” (off), the battery pack is
disconnected and all the rotating parts are at a standstill before clean-
ing, carrying out inspections or moving from one place to another.
Do not put part of your body such as hands and fingers in the vacuum
opening or exhaust opening.
Do not switch the machine on in enclosed or poorly ventilated spaces or
in the presence of flammable and/or explosive substances such as
liquids, gas and powders.
Blow mode can be also used to clean corners, fences, walls, wooden
areas or beneath cars. Be careful how you point the jet of air as it could
move heavy material and cause injury or damage.
Turn the switch to on, point the jet of air in front of you and move for-
ward slowly to gather together the leaves or to move the leaves from
inaccessible areas.
BLOWING
TO TURN THE TOOL ON
Push the lock button in with your thumb and then squeeze the trigger with
your fingers. (Once the tool is running, you can release the lock button).
To turn the tool OFF, release the trigger.
WARNING: Do Not use the blower with any type of accessory or
attachment. Such usage might be hazardous.
TUBE ASSEMBLY
To attach the tube to the blower, line up the tube with the blower housing
as shown. Push the tube into the blower housing until the lock button
engages the lock hole in the tube.
OPERATING
UNPACKING
PACKING LIST
This product requires some assembly.
Carefully remove the product and any accessories from the box .Make
sure that all items listed in the packing list are included .
Inspect the product carefully to make sure no breakage or damage
occurred during shipping ,
Do not discard the packing material until you have carefully inspected
and satisfactorily operated the product .
If any parts are damaged or missing ,please call 1.800.313.5111 for
assistance .
Assembling the unit as a blower
Connect two blower tubes together。
Fit the larger diameter end of blower tubes onto the air outlet
of the motor housing and rotate until engaged .
- Blower
- Blower Tube
- Battery and Charger
- Instruction manual
ASSEMBLY
MAINTENANCE
If you drop the blower, carefully inspect it for damage. If the tube is
broken, housing cracked, or handles broken or if you see any other
condition that may affect the blower’s operation, contact your local
Authorized Service Center for repairs before putting it back into use.
CAUTION: Do not at any time let brake fluids, gasoline, petroleum based
products, penetrating oils, etc., come in contact with plastic parts. They
contain chemicals that can damage, weaken or destroy plastic.
Make sure the battery is detached from the unit, then use only mild
soap and a damp cloth to clean the tool. Never let any liquid get inside
the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by an authorized
service center or other qualified service organization, always using
identical replacement parts.
Fertilizers and other garden chemicals contain agents which greatly
accelerate the corrosion of metals Do not store the tool on or adjacent
to fertilizers or chemicals.
CALL US FIRST !!
Call us first with questions about operating or maintaining your cordless
blower at 1.800.313.5111 between 7:30 a.m. – 4:30 p.m. Eastern
Standard
To Next Page
Loading...
