English - 24 -
ξξ ξ·ξξξξξξξξοξξξξξξξξξξξξξξξξξξξοξξοξξξοξξξξξξξξξξξξξοξξξ
ξοξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξξοξξξξξξξξ
ξξ ξ·ξξξξΊοξξξξξξξξξξξξξξξξξξξξξξξ·ξΉξξξξξξξξξξξξξξξξξξξξ
ξξξ
ξξ ξξ ξξξξξ ξξξξξξξξξ¬ξξ οξξξοξξξξξ ξξξξξξξξξξξξ ξξξξξ
ξξξξξξξξξξξ ξξξξξξξξ ξ¬ξ¨ξ¨ξ¨ξξξξξξξξξ ξξξξξξοξξξοξξξ
ξξξξξξξξξοξξ ξξξξξξ ξξξ ξξξοξξ ξξξξ ξξξξοξ
ξξξ ξξξξ
ξξξξξ
ξξοξξξξξξξξοξξξξοξξξξξ
ξξ You must change your modemβs SSID when there
ξξξξξξξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξξξξξΆξΆξ¬ξ§ξξ
ξΌξξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξ
ξξξξξξξξξξξοξξξξ
ξΈξξξξξξοξξξξξξξξξξξοξξξοξξξξξξξξξξξοξξξξξξξξξ
ξξξξξ
ξοξξξξξξοξξξξξξξξξξξξξξοξξξξ
Configuring Wireless Device Settings
Open the Network menu and select Network Type as
Wireless Deviceξξξξξξξξξξξξξξξξξοξξξξξξξξξξξ
ξ«οξξξοξξξξScan Wireless Networks ξξξοξξξξξξξξξξξξξ
OKξξξξξξξξξξξξξξξξξξξξξξξξξξοξξξ
ξξξξοξξξξξξξξξξξξξξξξξ
ξ€ξξξξξξξξξξξξξξξξξξξοξξξξ
ξξξοξξξξξξξ«οξξξοξξξξξξξξξξξξοξξξξ
ξξξξξξξξξξξξξξξξξξοξξξξξξξξξξξξξOK to connect.
Note: If the modem supports N mode, you should set N
mode settings.
ξ¬ξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξξξξξξ
ξξξξοξξξξξξξξοξξξξξξξξξξ
ξξξξξξξΌξξξξξξξ
ξξξξξξοξξξξξξ
ξξξξξξοξξξξξξξοξξξξοξξξξξξ
ξξξξξξξξξξξξξξξ
OK button on the remote control.
ξΊξοξξξξξοξξξξξξξ¬ξ³ξξξξξξξξξοξξξξξξξξξξξξξξξξξξξξξξ
ξ·ξοξξξξξξξξξξξξξξξξξξξξξξξξοξξξοξξξξξξξξξξξ
ξοξξξξξξ
ξ·ξξ ξοξξξξξξξξξξξξξξ ξξξοξξξξξξξ ξξξξξξξξξξοξξξοξξξξ
Network Type ξξξξξξξξξξξ―ξξξξξξξξ΅οξξξξξ
ξξξξξξξξξξξξξξ
as Disabled.
If your router has WPS, you can directly connect to the
modem/router without entering a password or adding
the network first. Highlight Press WPS on your wifi
router option and press OK. Go to your modem/router
device and press the WPS button on it to make the
connection. You will see a connection confirmation on
your TV once the devices have paired. Select OK to
proceed. No further configuration is required.
ξ«οξξξοξξξξInternet Speed Test and press the OK button
ξξξ ξξξξξξ ξξξξξ οξξξξξξξξξξξξξξξοξξξ ξξξξξξξξ«οξξξοξξξξ
Advanced Settings and press the OK button to
ξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξξΈξξξξοξξξξοξξξξξξξξξ
ξξξξξοξξξ
ξξξξξξξξξξξξξξξξ«οξξξοξξξξSave and press the
OKξξ
ξξξξξξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξξ
Other Information
ξ·ξξξ ξξξξξξξ ξξξ ξξξξξξξξξξξοξξξ ξοξξξ ξ
ξξ ξοξξξξξξξξ ξξξ
Connected or Not Connected and the current IP
ξξξξξξξξξοξξξξξξξξξξξοξξξοξξξξξξξ
ξοξξξξξ
Connecting to your mobile device via WLAN
ξξ ξ¬ξξξξξξξξξξ
οξξξξξξοξξξξξξξWLAN feature, you can
ξξξξξξξξοξξξξξξξξξξξ·ξΉξξοξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξ
ξξξξ ξξξξξξξξ οξξ ξξξξξξξξοξξξξ ξ©ξξξξξοξξξ ξξξξξ ξξξ
οξξξ
ξξξοξξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξοξξξξξξξξξξξξ
ξ ξ¦ξξξξξξξξξξξξξ·ξΉξξξξξξξξξξξξξξξξξξξξξξοξξξξξξξξξξξξξ
ξξξξοξξξξξοξξξξξξξξξξοξξξξξξ
ξξξξ
ξ ξ€ξξξξξξξξξξξξξξξξξξξξξξξξξξξ
οξξξξξξοξξξξξξξξξξξξξξξξξ
ξξξξξξξξξξξξοξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξξξξξξ
οξξξ
ξξξοξξξξξ·ξξξξξξξξξξξξξοξξξξξξξξξξξξξξξξξξξξξξξξξξξξοξξξ
your TV.
ξ ξ¬ξξξξξξ ξξξξξξξοξξξ οξξ ξξξξξ
ξοξξξξξ ξξξξξξξξξξξ ξξξξ ξοξξξ
ξ
ξξξξ
ξξξξξξξξξξξξξξξξξξξξξξξξξοξξξξοξξξξξξξξξξξξξξξξξ
ξξξ
οξξξ ξξξοξξξ ξοξξ ξξξξξ€ξΉξΆξξξξοξξ ξοξξξξξξξξοξξξξ
feature of your TV.
ξ ξ«οξξξοξξξξξξξξAVSξξξξοξξξοξξξξξξSources menu and
press OKξξξξξοξξξ
ξξξ ξξξοξξξξξξξξξ ξξξοξξξξοξξ ξξξξ
ξξξξξξξξξοξξξξ
ξξξοξξξξξξξξξξΆξξξξξξξξξξξξξξ
οξξξξξξοξξξ
and press the OK ξ
ξξξξξξξξξξξξξοξξξξ
ξξ If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.
Wake ON
Wake-on-LAN (WoL) and Wake-on-Wireless LAN
(WoWLAN) are standards that allow a device to be
turned on or woken up by a network message. The
message is sent to the device by a program executed
on a remote device connected to the same local area
network, such as a smartphone.
Your TV is WoL and WoWLAN compatible. This feature
might be disabled during the First Time Installation
process. To enable this feature set the Wake On option
in the Network menu as On. It is necessary that both
the device, from which the network message will be
sent to the TV, and the TV are connected to the same
network. Wake On feature is only supported for Android
OS devices and can only be used via YouTube and
Netflix applications.
In order to use this feature the TV and the remote
device should be connected at least once while the
TV is on. If the TV is powered off, the connection
should be re-established, the next time it is switched
on. Otherwise this feature will be unavailable. This
does not apply, when the TV is switched into the
standby mode.
The performance of some devices in the market, may
vary due to the software architecture. In order to use
Wake On feature with a better performance, please
make sure that your device has latest firmware version.
If you want your TV to consume less power in standby
mode, you can disable this feature by setting the Wake
On option as Off.