EASE Diagnostics Universal Reprogrammer II+ User Manual

Introduction
Thank you for choosing Universal Reprogrammer II+! Universal Reprogrammer II+ will allow you to
re-flash modern vehicle controllers to stock as well as perform dealer level diagnostics on select
manufacturer’s vehicles.
This Quick Start Guide covers the initial setup, features, and common questions. This manual is always
available at http://www.obd2.com. Information for individual manufacturers can be found in the J2534
Toolbox 3 application.
Get to know Universal Reprogrammer II+
Power Protocol Connection Vehicle Cable USB Cable USB Cable Port
Auxiliary Programming Voltage Vehicle Cable Connection
LED Status lights:
Solid Red Blinking Red Solid Green Blinking Green
Power - Firmware error-Call
Tech Support
Device Startup In
progress
Device is Functioning
Protocol - - Connected to
Vehicle
Connected & communicating with
Vehicle
Vehicle Cable Cable Not
connected or
Cable error
- Cable Ok and
Vehicle power
detected.
-
USB Cable Install issue-
Call Tech
Support
- Connected to PC. -

EASE Diagnostics Universal Reprogrammer II+ Specifications

General

Brand	EASE Diagnostics
Model	Universal Reprogrammer II+
Category	Controller
Language	English