To Next PageTo Next Page
Need help?Do you have a question about the East Midlands Water Company SUMO and is the answer not in the manual?
General| Brand | East Midlands Water Company |
|---|---|
| Model | SUMO |
| Category | Water Dispenser |
| Language | English |
Details on filling and maintaining the salt/brine tank, including overflow.
Explanation of how the softener cleans its resin bed using brine solution.
Information on how soon soft water will be produced and factors affecting it.
Describes the visible and audible signs (or lack thereof) during softening and regeneration.
Contact information for technical support if further assistance is needed.
Guidance on choosing the optimal location for the water softener unit.
Information on fitting a check valve for single dwellings.
Details on required fitting kits for different boiler systems.
Importance of testing water pressure and using a pressure limiter if needed.
Instructions for connecting the waste and overflow hoses to the softener unit.
Procedure for testing the hardness of your water supply using the provided kit.
Guide on adjusting the softener's setting based on water hardness test results.
Steps for connecting the inlet and outlet valves to the main water supply.
Guidance on correctly attaching the hoses to the softener's inlet and outlet ports.
Instructions for routing the waste hose to a suitable drain or outlet.
Procedure for installing the overflow hose to prevent flooding.
Instructions on how to manually initiate the regeneration cycle.
Ensuring the brine tank always has sufficient salt supply for operation.
Recommendations for an anti-scaling process to maintain softener efficiency.
Steps for recommissioning the softener after a period of disconnection or relocation.
