EASTONTECH EW Series - Page 23

EW-ECO SERIES OPERATION MANUAL
23
1
、
the wire is placed in a roller intermediate, adjust the roll gap to have
just come into contact with the wire and then down 2 big;
2
、
setting size:
⑴ Enter setup mode: Standby mode press
⑵ Set the front stripping length
⑶ Exit strip, parameter setting
⑷ Set multistage mode: press set to multi
segment model;
⑸ Enter the number of segments is set: press set to more
footage;
⑹ Set the first segment length of stay skin
⑺ Set the first segment peeling
⑻ Set second leaving skin length
⑼ Set second