CH1~CH4: to select the 1~4 channel on.
Auto: stop/start channel auto-view, automatically select CH1-CH2-CH3-CH4, then CH1...
The default speed is 1 time/second (you can also change the speed with using "CH1~CH4", for example: when you click
"CH1" then click "Auto" the speed will be 1 time/second, CH2 for 2 time/second and so on...
Set: If you do not want to view any channel(s) of your camera, because some reason or you do not have 4 cameras, you can
choose to skip the channel(s) when you using channel auto-view function. Use "SET" key and “CH1~CH4” keys you can set
the LED light on and off for channel1~channel4 to make the relevant channel(s) be skipped. (light on means the channel
working
light off means the channel is skipped)
To Previous Page
Loading...