EasyDrive MINI-L-2S0007M - User Manual

CV3100 series and MINI series high performance general purpose inverter instruction manual
Preface
Thanks for your purchase of CV3100 series and MINI series inverter
manufactured by us.CV3100 series and MINI series inverter is of sensor-less vector
control frequency inverter with high torque, high accuracy and wide range of speed
regulation, designed with the brand-new idea. Based on improving stability, it is
provided with many run and control functions such as motor parameters auto-tune,
simple PLC control, practical PID adjustment, flexible input/output terminal control,
parameter online amendment, pulse frequency setting, power-off and stopping
parameter storage, wobbling control , RS485 communication, constant pressure water
supply control and so on. This inverter provides equipment manufacturer and terminal
user with integrated solution of high integration level; helps to reduce the system
purchase and operation cost, and improves the reliability of system.
Before using CV3100 series inverter, please read this manual carefully, so as to
install and operate inverter correctly and enable it produce the best performance.
It is to be noted that this manual is subject to change without notice, and please
refer to new edition.
Reader range
This manual is suitable for following persons:
Installer of inverter, engineering technician (electric engineer, electric operating
worker), designer
Please make sure that this manual is delivered to the end user.
Stipulation of this manual
Stipulation of symbol
Warning
Conditions that cause medium injury or light injury due to operation not
accord to requirements
Danger
Conditions that cause death or serious injury due to operation not accord to
requirements

Summary

Chapter 1 General

1.2 Safety attentions

Critical safety precautions to be observed during installation and operation.

Chapter 2 Product specification and order notification

2.2 Specifications

Lists the technical specifications and operating parameters of the inverter.

Chapter 3 Installation and Wiring

3.1 Installation environment of inverter

Conditions and space requirements for inverter installation.

3.3 Attentions of wiring

Crucial warnings and precautions for wiring the inverter.

3.4 Wiring of main circuit terminal

Chapter 4 Running and Operating

4.1 Running of inverter

4.2 Operating and using of keyboard

How to operate the inverter using the control panel keyboard.

4.3 Inverter electrification

Chapter 5 Function parameter table

5.2 Function parameter table

Basic parameters for control mode and frequency input selection.

Chapter 6 Specification of function

6.1 Basic parameter

Basic parameter P0.00 for control mode selection (SVC, V/F).

6.2 Motor and vector control parameter

Parameters related to motor characteristics (voltage, current, speed, frequency).

6.5 Digital input and output parameter

6.6 Analog input and output parameter

6.7 Process PID control parameter

Parameters for setting up the PID control system.

6.8 Programmable running parameter

6.9 Communication parameter

6.10 Protection parameter

Parameters for motor overload stall prevention and low voltage prevention.

Chapter 7 Troubleshooting

7.1 Failure and countermeasure

General information on inverter faults, codes, and countermeasures.

7.3 Fault reset

Procedures for resetting the inverter after a fault occurs.

Chapter 8 Maintenance

8.1 Maintenance

8.2 Regular maintenance

EasyDrive MINI-L-2S0007M Specifications

General

Brand	EasyDrive
Model	MINI-L-2S0007M
Category	Inverter
Language	English