EasyManua.ls Logo

EasyLine MF/914 - MC;1452 Saving Baking Programs; MC;1452 Operation Status Information; MC;1452 Safety Lock Mode

EasyLine MF/914
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 29 - English language
346-074-1.fmIDM
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ MC/1452 MICROWAVE OVEN
Saves a baking programme
1. Press button (P) repeatedly until the desired programme appears on display (A) (up to
three programmes to be saved can be selected).
2. Press one of the buttons (B-C-D) to select the required operating mode.
3. Press the same button repeatedly to select the desired power level.
4. Press buttons (F) sets baking time that appears on display (A).
5. Press button (P) to save the set programme.
The saved programme is available and can be used at any time.
Information on the status of operation
When equipment is operating, the indicated information can be shown on display (A) for a
few seconds.
Current power level: press button (B-C-D) corresponding to the current operating
mode.
Remaining baking time: press button (N).
Time left when starting a programmed baking cycle: press button (N).
"Safety lock" mode settings
1. Press the button (H) and hold down for at least 3 seconds to start the function. The ap-
pliance emits an acoustic signal and a light appears on the display (A) to indicate that
all controls are disabled.
2. To turn off the "Safety lock" mode, press the button (H) and hold down for at least 3 sec-
onds. The appliance emits an acoustic signal and the light turns off on the display (A).

Table of Contents