IMPORTANT
- Don’t open the battery door under water.
- Close the battery door properly for best water sealing.
- Rinse the camera with clean water after used and keep it dry for
storage.
1. Getting to know your camera
14.0 Mega pixels resolution sensor
Digital still camera
Digital video camcorder
Built-in flash light
4x digital zoom
2.7+1.8 " TFT color display
MicroSD card support
2 x AAA alkaline batteries
2. Functional parts
Press this button to take photographs or to start /stop recording
a video clip, or to confirm changes in menu mode
Press this button for at least 2 seconds to switch on or off the
camera,or press it to display or hide the status icon on LCD.
Press this button to switch between the front monitor and the back
monitor.
Use the front monitor when taking self-portrait shots
Use the built-in flash to give the subject extra lighting when
shooting in the dark (the best shooting distance is within 1.5m).
Capture the image.
Note: Keep the lens clean. Dirt and fingerprints will affect the
quality of the picture.
When the indicator is blinking, the camera is busy.
Macro mode: Select this mode to take close-up photographs
(distance 11cm - 18cm).
Normal mode: Select this mode to take photographs from
0.5m - infinity.
Display photographs, video clips, camera setting and menu.
In Preview mode: press this button for zooming in.
In Menu mode: press this button to move up the selection bar.
In Image Playback mode: press this button for enlarging the photo.
In Video Playback mode: press it to start/pause the video.
In Shooting mode: press this button for zooming out.
In Menu mode: press this button to move down the selection bar.
In Image Playback mode: press this button for reducing the photo size.
In Video Playback mode: press this button to enter the thumbnail mode
In Menu mode: press this button for the left selection;
In Playback mode: press this button to go back to the previous one;
In Photo Infinite Preview mode: press this button to switch to Flash
mode;
When zooming in under Image Playback mode: press it to move to the
left portion of the photo.
In Video Playback mode: press it for fast rewind.
Press this button to enter Playback mode;
In Playback mode: press this button to move to the next one;
In Menu mode: press this button for the right selection;
When zooming in under Image Playback mode: press it to move to the
right portion of the photo.
In Video Playback mode: press it for fast forward.
Press this button to switch between movie and still capture mode;
In Playback mode: press this button to exit.
When zooming in under Image Playback mode: press it to move to
the upper portion of the photo. In Video Playback mode: press it to
In Preview mode: press it to enter the settings Menu.
In Playback mode:
Press it for a short time to enter“Delete single/ all files”mode;
Press it for a long time to enter file compiling and system setting
menu.
In Photo (zoom in) Playback mode: press it to move to the down
area of the photo.
For fixing the camera on the tripod.
You can download photographs and video clips to a computer
when connecting with a USB cable. (not included)
MicroSD card storage location.
Compartment for 2 x AAA alkaline batteries
Hook for attaching the wrist strap to the camera.
3. Explanation of the status icons
Shows the current operating mode:
Photo mode.
Video mode.
Force flash: The flash will be on under any
environment.
Auto flash: The camera determines if the flash
should be used or not.
No flash: The flash is turned off.
Mode (0.5m – infinity).
Macro mode (11cm – 18cm).
Indicates the Self-timer is set
Shows the selected picture resolution:
20 M = 5184X3888;14M = 4320x3240;
8M = 3264x2448; 5M = 2592x1944;
3M = 2048x1536; VGA = 640x480
The batteries are full.
The batteries are empty.
Shows the zoom ratio during preview mode
Indicates the MicroSD card is inserted and will be
used as storage for PHOTO and VIDEO
Shows the selected White-balance mode.
Photo mode: No. of pictures that can be taken.
Video mode: Available recording time.
4. Details for camera settings
White balance for shooting
under fine weather condition
White balance for shooting
under cloudy condition
White balance for shooting
under tungsten lighting
White balance for shooting
under fluorescent lighting
±2.0, ±5/3, ±4/3, ±1.0, ±
2/3, ±1/3, 0
Normal/ B&W/ Sepia/ Negative/
Lomo/ Pencil Sketch/ Red/
Green/ Blue/ Vivid
VGA 640 x 480
QVGA 320 x 240
White balance for shooting
under fine weather condition
White balance for shooting
under cloudy condition
White balance for shooting
under tungsten lighting
White balance selected for
shooting under fluorescent
lighting
Select power frequency in
your location
Off / 1Minute / 3 Minutes
English/ French/
Deutsch/Italian/Spanish/
Portuguese/Japanese
Display language selection
Reset all settings to factory
default positions
Shows the firmware version
Note: Turning off the camera will not erase the last settings.
5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera compartment.
3. Close the battery door.
Note:
Make sure that the batteries are inserted in the right directions (as marked in the diagram above).