Why is my Easypix Cyber Scanner Basic Copier image overexposed?
The Easypix Copier automatically adjusts to the slide/negative exposure. Allow the live view window to finish adjusting before clicking 'Capture'. Also, the slides or negatives may have been overexposed during their original development. You can use the MediaImpression software to further adjust or improve the image quality.
What to do if my computer does not recognize the Easypix Copier?
If your computer displays a 'device not recognized' message, it might be because the Easypix Copier isn't plugged into a high-speed USB port. Your computer needs a USB 2.0 port to communicate with the image copier. Check if USB 2.0 is installed on your computer. If not, you can upgrade your USB ports; this hardware is available at most electronic stores.
What to do if my Easypix Cyber Scanner Basic software says it will expire?
If you receive a message stating that your software will expire, it is likely that you downloaded a trial version from the ArcSoft website. To resolve this, uninstall the downloaded MediaImpression software and reinstall it using the CD provided with your Easypix Copier.
What to do if the Easypix Copier installation disc will not auto start?
If the installation disc doesn't auto-start, the problem may be with the install CD or your CD drive. Check if your CD drive is operating properly. If possible, check another computer to see if the disc is recognized. Some anti-virus systems may block the auto-start; if this is the case, install manually.
Why does my Easypix Cyber Scanner Basic Copier not work with my Mac computer?
If your Easypix Copier isn't working with your Mac, it may be because your Mac OS is version 10.4 or below. Some older Mac versions do not support UVC. Please upgrade to the latest version 10.4.11 or above.
What to do if I found the black edge when seeing the photo in Easypix Copier?
If you see a black edge in your photos, it is due to film/slide size tolerance. Crop the photo using software. For detailed instructions, please refer to the 'Edit the picture' point '1.4 Crop' in this manual.
What to do if I found black edge in preview mode of Easypix Cyber Scanner Basic Copier?
If you find a black edge in preview mode, it may be because the slide is not in the central position within the holder. Tilt the scanner left or right, the slide will slip, and then check the preview photo again.
Lists included items like Image Copier, QSG, CD, film holders, and cleaning brush.
Identifies key components of the Image Copier and holders with labels for user reference.
Steps to install ArcSoft MediaImpression on Windows OS from the CD for scanner operation.
Steps to install ArcSoft MediaImpression on Mac OS from the CD for scanner operation.
Capturing images using the MediaImpression software on a Windows computer.
Capturing images using the MediaImpression software on a Mac computer.
Enhancing photos by adjusting brightness, contrast, color balance, fixing red-eye, cropping, straightening, and blurring backgrounds.
Using tools like Healing Brush, Clone, Smudge, Sharpen, and Blur to fix imperfections, remove unwanted elements, and modify images.
Clipping pictures using selection tools like Rectangular, Elliptical, Freehand, Magic wand, and Magnetic for editing.
Technical details of the device including sensor type, resolution, lens specification, PC interface, and bundled software.
Solutions for common problems like computer recognition, installation errors, software expiry, and image quality issues.
Lists PC and Mac hardware and OS configurations required to install and operate the Digital Image Copier effectively.
To Next Page
General