To set up Menu Mode
1．In Communicator mode, enter to Menu mode by pressing the Menu key
repeatedly until a short key-beep tone is heard, with icon flashing.
2．The unit automatically times out of Menu mode and enters Communicator mode
in 8 seconds.
3．Select the aim menu, and press up or down to set up communicator mode or
watch mode as the segment icons flashes.
4 ． Press PTT/Call can automatically cancel Menu Mode. Return back to
communicator mode.
To set the time
This device has a 12-hour (AM/PM) Time Clock, which can be set as follows:
1．In Communicator mode, enter to Menu mode by pressing the Menu key
repeatedly until a short key-beep tone is heard. When the Setting mode is
engaged, the Hour segment in the LCD Display will flash.
2．Press the Up or Down key to increase or decrease the Hour number displayed, a
short key beep tone is generated at each key press. The Time Setting will cycle
within 12 am and 12 pm. To engage auto-repeat, press and hold the Up or
Down key.
3．Advance thru the Menu by pressing the Menu key briefly until the Minutes
Segment is flashing, A short key beep tone will be generated.
4．Press the Up or down key to increase or decrease the Minutes number displayed,
a short key beep tone is generated at each key press. To engage auto-repeat,
press and hold the Up or Down key.
5．Exit the Menu mode to return to Communicator Mode, by pressing the Menu key
briefly or the unit will automatically time out of Menu mode and enter
communicator Mode about 10 seconds after the last key is pressed. Your
communicator has a built in Menu function that makes accessing its advanced
features easy.
To Next Page
Loading...