Need help?Do you have a question about the EasyThreed X1 and is the answer not in the manual?
General| Build Volume | 100 x 100 x 100 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA |
| Frame Material | Plastic |
| Printing Speed | 10-40 mm/s |
| Power Supply | 12V, 30W |
| Connectivity | USB |
| Technology | FDM |
Identifies key physical components of the 3D printer, including the print head, axes, and build platform.
Details essential technical specifications like operating temperature, humidity, electrical input, and print settings.
Step-by-step guide to properly level the print bed using paper for optimal first layer adhesion.
Procedure for inserting filament into the print head and feeding it until extrusion is successful.
Details on starting a print job, inserting the TF card, and the printing process.
Instructions on how to pause an ongoing print and resume it later.
Method to cancel a print job that is currently running.
Procedure for removing filament from the print head, often for changing or storage.
Covers safe disassembly, cleaning, and nozzle maintenance for the printer.
Specifies recommended working environment temperature and humidity levels.
Troubleshooting common causes for poor print adhesion, like nozzle-to-bed distance.
Addresses issues with filament not coming out of the nozzle, checking feeder and temperature.
Solutions for print displacement, including slicing issues, nozzle path, and power supply.
Explains factors affecting print accuracy, such as filament flow, temperature, and bed distance.
To Next Page
